Before you Begin

Natural Gas

LPG

Wood

Multifuel

Brick Chimney

A conventional brick chimney is recognisable by a chimney stack with a terracotta pot or gas terminal.

Pre-Fabricated Flue

This is an interlocking flue tube system, identifiable by a metal flue and terminal on the roof, and a metal flue box behind the fire.

Pre-Cast Flue

Pre-cast flues can be identified by a ridge vent or metal flue tube and terminal on the roof. Constructed from concrete or clay blocks they form a rectangular section flue. All fires featuring this icon are only suitable for pre-cat flues conforming to BS EN 1858.

Balanced Flue

Balanced Flue fires vent directly outside through a horizontal co-axial pipe (one pipe within a larger pipe). The Outer pipe draws air in from the outside and the inner pipe expels combustion gases.

Powerflue

Powerflue fires expel the combustion gases directly outside the building through the use of an electronically driven fan unit mounted on the external wall.

No Chimney

If you do not have a chimney/flue and do not want to install a balanced flue or Powerflue product then an electric fire may be the best option for you.

Manual Control

A simple and discreet control system located behind the fire's trim or fret on inset fires and the bottom side of outset fires.

Slide Control

Convenient control that eliminates the necessity of bending down.

Top Control

A push down and twist ignition and control located on the top of outset fires means you don’t have to bend down to light the fire.

Electronic Flame Control

Discreet easy access buttons are used to ignite the fire and adjust heat and flame height..

Electronic Top Control

Both ignition and heat are controlled by a single rotary motion to light the fire. These easy to use controls are now available on our best selling radiant outsets. Requires an AA battery.

Electronic Side Control

Both ignition and heat are controlled by a single rotary motion to light the fire. These easy to use controls are now available on our best selling radiant outsets. Requires an AA battery.

Semi Automatic Remote Control

Light the fire using the manual control system then use the remote control handset to adjust the flame height and heat output.

Fully Automatic Remote Control

The remote control handset is used to light the fire as well as adjust the flame height and heat output.

Fully Automatic Remote Control with Thermostatic Operation

The remote control handset can be used to light the fire as well as to adjust the flame height and heat output. In addition, the handset contains the extra benefit of a thermostatic control to regulate room temperature.

Multifunctional Remote Control

This hand set is not only used to ignite the fire, control the heat/flame level and extinguish the fire, it also operates thermostatic and timer functions which allow you to preset a desired room temperature and to set the times of day you would like the fire to turn on and turn off. In addition to the heat and time settings your fire features dimmable decorative lighting which can be used with or without the flame being in operation. Your handset is used to turn the decorative lighting on or off and to adjust the brightness level.

Plain Black

Black Brick Design

Black Ribbed Design

Cream Ribbed Design

Stone Brick Effect

Glossy Black Enamel

Coal Effect

Pebble Effect

White Stones

Log Effect

Driftwood Effect

Flame Only